Whether it's a slow leak that's been eating your subfloor for weeks or a flooded basement at 2am, our Custer crews are already moving. Our Custer-based teams arrive with truck-mount extractors, moisture meters, and drying gear staged and ready to go.
Too many Custer, MI families have called a big national number only to get bounced through hold music before a random subcontractor shows up hours later, so Hirex Water Damage built its Custer operation differently. Every technician on our Custer roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Water Damage Repair in Custer isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Custer, MI, so you're protected from the moment our truck pulls into the driveway.
Because our equipment lives in a Custer, MI warehouse rather than out of state, we're not waiting on a supply run before we can start extraction.
Ask any Custer property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Custer call at a time.
Water damage doesn't always look dramatic at first — some of the costliest Custer jobs we've handled began as a small, easy-to-miss problem. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Custer dispatcher will give you an honest read on urgency, not a sales pitch.
We size the Custer response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
Truck-mounted extraction equipment on every Custer rig pulls high volumes of standing water fast, so drying starts the same day instead of the next. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
On the residential side in Custer, we handle the flood-cut, subfloor checks, and content pack-out so your home is ready to rebuild, with clear photo documentation at every stage for your insurance claim.
Multi-unit and commercial Custer properties get their own project manager plus enough drying equipment to cover the real square footage, not a token setup — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Custer crews are trained for exactly that protocol.
Every Custer job includes a preventive antimicrobial application, and if we spot conditions that need full remediation we tell you plainly instead of quietly hoping it clears up.
You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Because our equipment cache sits inside Custer, MI, most Custer calls see a technician on-site in under 60 minutes.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
Final moisture readings have to hit dry-standard before we consider a Custer job done, and getting there again is on us, not you.
A short call with our Custer dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
Our nearest available Custer crew is dispatched immediately with truck-mount extraction gear on board.
We remove standing water first, then map moisture and position air movers and dehumidifiers based on the readings.
We don't close the file until the numbers confirm the structure is dry, and you leave with full photo and moisture documentation.
Our Custer technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
We put that guarantee directly on the Custer work order, not just in an ad. We try to send the original technician back for any follow-up so you're not re-explaining the job to someone new.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"The team handled every conversation with my adjuster — I never had to explain what psychrometrics meant to anyone." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"They worked overnight so our restaurant wasn't closed longer than it had to be. That mattered a lot to us." — Aaron W.
"Sewage backup is not a fun call to make, but the crew treated it professionally and explained the whole containment process." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Most Custer dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
Upfront, written pricing is standard on every Custer job, not an add-on option.
Our Custer on-call rotation covers water extraction, drying, and blackwater cleanup any hour of the day or night.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
We regularly handle sewage backups in Custer using full containment, PPE, and EPA-registered antimicrobial products.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Custer tech confirms it's safe.
Yes, we regularly respond to commercial and multi-unit losses in Custer, including retail, restaurants, and office space.
Typical drying time runs 3-5 days for a Custer home, though a job that sat unaddressed longer can take longer to fully dry.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
Our Custer guarantee covers a 30-day callback window — if moisture shows up again from the same loss, we come back free of charge.
We cover Custer and the surrounding zip codes listed below, plus neighboring communities throughout Custer, MI.
Our Custer dispatch covers the full city plus a wide radius of surrounding zip codes, backed by additional crews staged throughout Custer, MI for larger losses. If your address falls inside or near Custer, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Custer, Custer, MICall now and speak with a real Custer dispatcher, not a national call center.
Call +1-844-578-1604